Thorens Td124 Service Manual Direct

The manual shows the four screws and the grounding strap that secure the chassis to the plinth. Remove these carefully to avoid stripping the 60-year-old threads.

According to the manual, you must disconnect the motor springs (Part #124) using two pairs of pliers. Do not stretch them. Set the motor on a clean cloth. thorens td124 service manual

The manual instructs you to remove the platter, pull the inner shaft, and clean out the old oil. Crucially, it notes the thrust ball (Part #138) at the bottom. Do not lose it. The manual says to replace the felt oil wick (Part #137) if it is hard. The manual shows the four screws and the

However, these machines are now over 60 years old. They are electromechanical time capsules. If you own one, or are thinking of buying one, there is one tool more valuable than a brand new Ortofon cartridge or a high-mass plinth: Do not stretch them

Weight, dimensions, wow & flutter specs (0.1% RMS when new), and signal-to-noise ratio. This is your benchmark. If your deck doesn't meet these, something is wrong.

The TD124 came in 50Hz (European) and 60Hz (US) versions. The manual shows how to re-wire the motor for different voltages (110/125/220/240v). If you import a deck from Germany to the USA, you must follow this diagram or you will burn the motor coils.

Using the diagram, locate the idler wheel cam. The manual details how to adjust the eccentric pin to ensure the idler meets the motor pulley and the inner platter rim perfectly flush—not vertically misaligned.