On an SX125, the waste ink pad is located at the bottom right side of the printer (under the capping station). When you run 200+ cleaning cycles, that sponge becomes saturated.
This error is not a hardware malfunction in the traditional sense. It is a counter lock. Your printer has been counting every single time it cleans its print head, and it has decided that a sponge inside (the waste ink pad) is theoretically full. In many cases, the pad still has capacity left, but the printer refuses to work. epson adjustment program sx 125 work
Yes, but only if you use the correct version. The SX 125 belongs to the SX120 series adjustment program package. Many users fail because they download a generic program intended for an R290 or an older ME series. On an SX125, the waste ink pad is
After 5–10 seconds, a green checkmark will appear. The program has successfully worked on your SX125. Turn the printer off, wait 10 seconds, and turn it back on. The "Service Required" error should be gone. Part 5: The Critical Warning – Physical Waste Ink Overflow Here is where most online guides lie to you. The adjustment program resets the counter , but it does not empty the physical sponge. It is a counter lock
Yes, it works flawlessly – provided you respect three rules: use the correct SX120 series software, enter maintenance mode correctly, and physically address the waste ink overflow within a few months.