rommon 2> tftp 192.168.1.100 get C800 Universalk9mzspa1593m10bin Replace 192.168.1.100 with the IP address of your TFTP server.
Router> reload Router> setup Follow the setup wizard to configure the router.
Connect to the router using a console cable or a remote console connection (e.g., SSH). c800universalk9mzspa1593m10bin install
In ROMMON mode, set the IP address of the TFTP server using the ip command:
Configure your TFTP server to host the C800 Universalk9mzspa1593m10bin image. Ensure that the TFTP server is reachable from the router. rommon 2> tftp 192
Download the C800 Universalk9mzspa1593m10bin image from the Cisco website or a trusted source. Verify the integrity of the image by checking its MD5 checksum.
Download the C800 Universalk9mzspa1593m10bin image from the TFTP server using the tftp command: In ROMMON mode, set the IP address of
rommon 4> flash C800 Universalk9mzspa1593m10bin